Linear Power Amplifier BAA 120 BEAK
The power amplifier BAA 120 BEAK was developed for the control of vibration test systems with a maximum of 120 VA. The RMS output power is calculated at a load impedance of 4.0 Ohm with 120 W sine output power. The frequency of the power amplifier ranges from 40 Hz to 20 kHz at full power or with DC to 100 kHz with reduced power and minimum harmonic distortion. The device offers extremely stable operation within the specified temperature and voltage range and is therefore highly reliable. The power amplifier allows operation in both voltage and current mode. Its RMS output current limit is variable.
|Continuous Sine Output Power||120 VA|
|Frequency Range||DC – 100 kHz (-20 dB)|
|Frequency Range at full Power||40 Hz – 20 kHz|
|Optimum Impedance||4 Ohm|
|Max. Voltage (RMS)||22,0 V|
|Max. Current (RMS)||5,5 A|
|Max. Current (DC)||5,0 A|
|Input Voltage||< 5 V|
|Nonlinear Harmonic Distortion Factor||< 0,05 %|
|Noise and Hum||> 90 dB|
|Dimensions W x H x D (mm)||482 x 88 x 450|
|Weight (kg)||14 kg|
|Protection Circuits||Current Limiting
Would you like an individual product consultation? We’re happy to advise!